Dynomotion

Group: DynoMotion Message: 2593 From: judrandom Date: 12/4/2011
Subject: Few more questions.
I need a way to capture screenshots for posting can you recommend a way? Would saving data on the step response screen and posting that be better?
Also in the k-motion Cnc program for the last few versions the simulate box disappears then shows overlaid in the program number boxes later going away completely. Is there a fix for this. Thank you.
Judleroy
Group: DynoMotion Message: 2594 From: Tom Kerekes Date: 12/4/2011
Subject: Re: Few more questions.
Hi Judleroy,
 
A screen shot is good because it also shows the settings.  One method is Alt-PrintScreen saves to the clipboard, then paste into Paint, and save as a *.png file.
 
Saving the data to a file is good because it allows us to plot in various modes, position error, current, supply voltage, etc as well as zoom in but also please include screen shots of the Step Response, Config, and Filter screens so we know what your settings are.
 
Regarding the KMotionCNC screen I can't duplicate that problem.  I assume you are using the re-sizable screen face that moves that cell with the size?  Any more clues you can give to help us reproduce it?  What OS?   What Screen Resolution do you have?
 
Thanks
TK

Group: DynoMotion Message: 2595 From: judrandom Date: 12/4/2011
Subject: Re: Few more questions.
The os is windows xp pro. I will check the resolution and see if I can pinpoint exactly where things go wrong. I will try to save screenshots and data and post them on Cnczone this evening if possible. Thanks
Jared

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi Judleroy,
>  
> A screen shot is good because it also shows the settings.  One method is Alt-PrintScreen saves to the clipboard, then paste into Paint, and save as a *.png file.
>  
> Saving the data to a file is good because it allows us to plot in various modes, position error, current, supply voltage, etc as well as zoom in but also please include screen shots of the Step Response, Config, and Filter screens so we know what your settings are.
>  
> Regarding the KMotionCNC screen I can't duplicate that problem.  I assume you are using the re-sizable screen face that moves that cell with the size?  Any more clues you can give to help us reproduce it?  What OS?   What Screen Resolution do you have?
>  
> Thanks
> TK
>
> From: judrandom <judrandom@...>
> To: DynoMotion@yahoogroups.com
> Sent: Sunday, December 4, 2011 12:03 PM
> Subject: [DynoMotion] Few more questions.
>
>
>  
> I need a way to capture screenshots for posting can you recommend a way? Would saving data on the step response screen and posting that be better?
> Also in the k-motion Cnc program for the last few versions the simulate box disappears then shows overlaid in the program number boxes later going away completely. Is there a fix for this. Thank you.
> Judleroy
>